Connecting To Hdmi - Targa LT 4010 Owner's Manual And Service Information

Connections and Start of Operation

Connecting to HDMI

HDMI (High Definition Multimedia Interface) is an input for digital image and
sound signals. This input also transmits the multi-channel sound for 5.1 audio
systems to the digital audio output.
You can either use a HDMI cable or a DVI-HDMI adapter cable together with an
audio cable. The adapter cable is not included in the delivery.
1.
Plug the HDMI cable into the socket [HDMI 1] or [HDMI 2] and the output socket
of the external device.
Or
1.
Plug the HDMI/DVI cable into the socket [HDMI 1] and the output socket of the
external device.
2.
Plug the audio cable into the socket [PC SOUND] and connect it with the output
sockets of the external device. The audio cable is not included in the delivery.
3.
Set the sound source to PC. See chapter "Sound Settings" on page 27.
You can use both [HDMI] connections parallel.
12
To transmit the multi-channel information 5.1 to the digital audio
output, your external device must provide the function "Bitstream" or
"RAW". In this case the sound is not played by the loudspeakers of
the television set.
If your external device does not provide this function, use the setting
"PCM" or "Auto" to provide a stereo signal to the digital output and
activate the sound of the loudspeakers on the television set.
LT 4010