Change Channel; Set Colour System - Targa LT 4010 Owner's Manual And Service Information

Settings

Change channel

Use this function to set the channel for individual stations.
1.
Press [ ]. To return to the main
menu, press [
2.
Press [ ] or [ ] and select
INSTALLATION.
3.
Press [ ] or [
PROGRAMME.
4.
Press [ ] or [ ] and select the
desired channel.
5.
Adjust the settings in the other
menus.
6.
Press [ ] to save the settings.

Set Colour System

Use this function to set the television signal to your national television standard.
1.
Press [ ]. To return to the main
menu, press [
2.
Press [ ] or [ ] and select
INSTALLATION.
3.
Press [ ] or [
COLOUR.
4.
Press [ ].
5.
Press [ ] or [
desired setting.
6.
Press [ ] to confirm the selection.
7.
Press [ ] to save the settings.
The following settings are available:
24
] several times.
], and select
These settings are made automatically by the automatic tuning
function. You should only change the settings described in this
section, if you are familiar with the reception of television signals.
] several times.
], and select
] to select the
LT 4010