Connecting To Audio Output; Notes On Handling Headphones - Targa LT 4010 Owner's Manual And Service Information

LT 4010

Connecting to Audio Output

Use this output to transmit analogue sound signals. Use this output to connect a
home theatre system, wireless headphones or a suitable AV receiver/Stereo
amplifier.
1.
Plug the audio cable into the socket [SOUND LINE OUT L/R] and the input socket
of the external device.
If you are using this output, turn the volume of the loudspeaker on the TV set
down and adjust the volume using the external device.

Notes on Handling Headphones

Never operate the loudspeakers or your headphone at high volume over long
periods of time. Otherwise you imperil your hearing and disturb your environment.
Never operate the loudspeakers or the headphone in hazardous situations, e.g.
in traffic or when working with machines. Any distraction by noise reduces your
attention and may lead to accidents.
Even if your headphone is designed to allow hearing of environmental noise,
never turn the volume so high that you cannot hear what happens around you.
Only use headphones with an impedance of 30 - 50 ohm. The use of headphones
with other impedances may permit hazardous sound level pressure.
Connections and Start of Operation
13