Settings
Setting up for Operation
You can adjust various settings of the unit to adapt it to your requirements.
Open, Select and Close Menus
The settings of the unit are accessible via menus. To navigate in the menus
proceed as follows:
1.
Press [
].
The main menu opens. The submenu
selected last will be displayed.
2.
To return to the main menu, press
[
] several times.
3.
Press [ ] or [ ] to select the desired
menu.
Or
4.
Press [
] or [
desired sub menu.
5.
Press [ ] or [ ] to set the desired sub
menu.
6.
Press [
] to move one menu level up.
7.
Press [
] or [
8.
Press [
] to activate the desired setting.
9.
Press [
] to save the settings and to close the menu.
Tuning
Starting Automatic Tuning TV Stations
Use this feature to start automatic tuning. The TV channels will be tuned and
stored. Later you can rearrange the sorting of the TV channels as you wish.
22
] to set the
] to select the desired setting.
You only need to tune the TV channels, if the device is connected to
a roof aerial. If you use a satellite receiver, a decoder or a similar
device, the signal of this device will be shown. Press [
the desired device.
LT 4010
] and select