3. Engine oil filter replacement:
- Unscrew the oil filter with a proper adjustable strap wrench.
- The new oil filter cartridge must be tightened manually after
having lubricated the rubber gasket.
Warning
• When replacing the oil filter and the fuel filter, keep them
separated from other waste.
• Use only genuine repair parts.
4 . Fuel filter replacement:
- By means of the proper wrench, the same as that used
previously for the oil filter, disassemble the fuel filter.
- When reassembling the new fuel filter cartridge, the rubber
gasket on the internal circle must also be replaced and the
one on the external surface is to be lubricated. Tighten the
cartridge manually.
5 . Check cooling circuit sleeves:
- Carefully check the wear of the hoses through which the
coolant flows. .
- Replace sleeves if worn out (Contact authorised workshops).
Every 600 hours:
1. Alternator belt replacement:
Important
• Contact authorised workshops.
2. Replacement sleeves:
Important
• Contact authorised workshops.
MAINTENANCE
61
EN