Run-In; Stopping; Maintenance; Maintenance (After The First 50 Working Hours) - Kohler SILENCE VALDINOCI Series Assembly, Use And Maintenance Instructions

58

Run-in

- During first 50 hours do not exceed 70% of maximum rated
power.

Stopping

Before stopping
- Reduce to minimum speed for a few minutes.
Stopping
- Rotate the key anti-clockwise
- Remove the key

Maintenance

Important
• Maintenance operations to carry out on cold engine .
• Use only genuine repair parts. Failure to use genuine parts could result in sub-standard performance and low longevity.
• The non-observance of the operations described in the following pages can involve the risk of technical damages to the machine
and/or the installation
• Failure to do so will make warranty void.
After the first 50 working hours:
1. Engine oil replacement.
2.Engine oil filter replacement.
Every 10 hours:
1. Check oil level by means of the proper dipstick
- Remove the side inspection door from the
upper part of the canopy.
- If oil level is very close to the minimum, top it up.
- After checking the level again, insert the dipstick once
more.
EN
STARTING/STOPPING