SIIG CE-KV0511-S1 Quick Installation Manual

SIIG CE-KV0511-S1 Quick Installation Manual

Usb vga kvm console extender over cat5

Advertisement

Quick Links

Quick Installation Guide

Introduction

The USB VGA KVM Console Extender over CAT5 allows for
keyboard and mouse control over a computer system
from either the local site or up to 150 meters away.

Features and Benefits

Control your computer system from transmitter
or receiver by USB Keyboard, Mouse, and
Monitor Console
Supports high resolution video up to 1920 x 1080
Transmission distance: Up to 150 meters over
standard CAT5 UTP network cable
Supports VGA, SVGA and MultiSync monitors
Local monitor supports DDC; DDC2; DDC2

System Requirements

PC with an available VGA and USB port

Package Content

USB VGA KVM Console Extender over CAT5
(Transmitter and Receiver)
Power adapters (2)
VGA with USB Type A cable
Rubber pads (4)
Quick installation guide
04-0895B
USB VGA KVM Console
Extender over CAT5
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CE-KV0511-S1 and is the answer not in the manual?

Questions and answers

Summary of Contents for SIIG CE-KV0511-S1

  • Page 1 USB VGA KVM Console Extender over CAT5 Quick Installation Guide Introduction The USB VGA KVM Console Extender over CAT5 allows for keyboard and mouse control over a computer system from either the local site or up to 150 meters away. Features and Benefits •...
  • Page 2 Application Remote console (keyboard, mouse and VGA display) Receiver * Extension distance up to 150 meters Transmitter Local console PC with USB and (keyboard, mouse VGA port and VGA display) CATx cable VGA cable VGA with USB Type A cable Figure 1: Application...
  • Page 3 Layout Local USB Local VGA Remote LED Local USB (keyboard) display (mouse) Figure 2: Front Panel of Transmitter Power LED +DC 5V RJ45 Figure 3: Rear Panel of Transmitter • Remote LED: Blinks when activity is detected • Local USB (mouse): Connects to local USB mouse •...
  • Page 4 • Power LED: On when power adapter is connected • +DC 5V: Plug the included power adapter here Remote USB Remote VGA Remote USB (keyboard) display (mouse) Remote LED Figure 4: Front Panel of Receiver +DC 5V Power LED RJ45 Adjusting Figure 5: Rear Panel of Receiver •...
  • Page 5 • Adjusting: Adjustment to get the clearest picture possible. Refer to Adjusting Switch section on the next page RJ45: Connects to the Transmitter's RJ45 port by • using one CATx cable (cable not included) • Power LED: On when power adapter is connected •...
  • Page 6 Connect your computer system to the Transmitter's PC port by using the included VGA with USB Type A Cable. Plug a USB keyboard and mouse (not included) into the Receiver's Local USB (keyboard) and Local USB (mouse), then plug a VGA display into the Receiver's Local VGA output by using a VGA cable (VGA cable not included).
  • Page 7 (3) years from the date of purchase of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship.
  • Page 8 Fremont, CA 94538-3152, USA Phone: 510-657-8688 USB VGA KVM Console Extender over CAT5 is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Mac and Mac OS are registered trademarks of Apple Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.

Table of Contents