Using The Web Interface; Connect To The Instrument Web Interface; Lan Troubleshooting Suggestions - Tektronix Keithley SourceMeter 2450 User Manual

Hide thumbs Also See for Keithley SourceMeter 2450:
Table of Contents

Advertisement

Section 3: Using a remote interface

Using the web interface

The 2450 web interface allows you to make settings and control your instrument through a web page.
The web page includes:
Instrument status.
The instrument model, serial number, firmware revision, and the last LXI message.
An ID button to help you locate the instrument.
A virtual front panel and command interface that you can use to control the instrument.
Ability to download data from specific reading buffers into a CSV file.
Administrative options and LXI information.
The instrument web page resides in the firmware of the instrument. Changes you make through the
web interface are immediately made in the instrument.

Connect to the instrument web interface

When the LAN and instrument establish a connection, you can open the web page for the instrument.
To access the web interface:
1. Open a web browser on the host computer.
2. Enter the IP address of the instrument in the address box of the web browser. For example, if the
instrument IP address is 192.168.1.101, enter 192.168.1.101 in the browser address box.
3. Press Enter on the computer keyboard to open the instrument web page.
4. If prompted, enter a user name and password. The default is admin for both.

LAN troubleshooting suggestions

If you are unable to connect to the web interface of the instrument, check the following items:
The network cable is in the LAN port on the rear panel of the instrument, not one of the
TSP-Link
The network cable is in the correct port on the computer. The LAN port of a laptop may be
disabled when the laptop is in a docking station.
The setup procedure used the configuration information for the correct ethernet card.
The network card of the computer is enabled.
The IP address of the instrument is compatible with the IP address on the computer.
The subnet mask address of the instrument is the same as the subnet mask address of the
computer.
3-12
®
ports.
Model 2450 SourceMeter® Instrument User's Manual
2450-900-01 Rev. E / August 2019

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Keithley SourceMeter 2450 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents

Save PDF