Machine Components - Meridian SEED TITAN 2XT Operator's Manual

Operator's Manual: Seed Titan™ 2XT Seed Tender
Large bulk seed boxes are loaded onto the
seed tender frame. Slide gates control the flow
of seed into the center-mounted auger hopper,
which transfers it from the seed boxes into a
planter or drill.
A gas engine mounted on the front of the trailer
powers the hydraulic pump. The pump powers
the auger drive motor and tube lift cylinder.
The auger unloads to the left side. A telescoping
delivery spout on the end of the auger tube
allows for convenient distribution.
Refer to the engine manual for specific
information on it.
The main components, and their general location
are listed below:
BOX 2
(Rear of tender)
3-2

3.1 MACHINE COMPONENTS

g
n
m
o
e
k f
Fig 4 - Seed Titan™ 2XT tender
a. Trailer Jack
b. Safety Chains
c. Break-Away Trailer Brake System
d. Gas Engine
e. 12 Volt Battery
f. Hydraulic Oil Reservoir
g. Auger On/Off Switch
h. Hydraulic Valve
i. Flow Control Valve
j. Hopper (1 of 2)
k. Box Lock-Down Bar with Handle (1 of 4)
l. Lower Auger Tube
m. Upper Auger Tube
n. Delivery Spout
o. Document Holder (inside frame)
BOX 1
(closest to hitch)
l
j
®
h i
d
a
c
b
01.2020