Meridian SEED TITAN 2XT Operator's Manual page 36

Operator's Manual: Seed Titan™ 2XT Seed Tender
10. When the job is done, close the seed box
slide gate.
11. Then, switch off the auger.
IMPORTANT:
If the tender will not be used again for an
extended period of time, the auger tube should
be cleared of all seed. This will help prevent
the tube from being clogged with seed.
12. Turn off the gas engine.
- Switch off the Fuel Shut-Off valve.
IMPORTANT:
Switch off the engine fuel before towing
the seed tender on the open road.
ELECTROCUTION HAZARD
Keep away from power lines.
• Auger tube must be folded down in
transport position while towing.
• DO NOT tow tender with auger tube upright
in operating position.
13. Hook the delivery spout to the tube for
storage.
14. Use the hydraulic valve to fold the auger
tube into transport position, if the tender is
going to be moved.
3-16
Fig 36 - Remote throttle switch
Fig 37 - Auger tube in transport position
®
01.2020