Creating The Lists - Datafox PZE-MasterIV Basic Manual

Manual Datafox PZE-MasterIV Basic
Figure 85: Setting the data types

5.3.1.4 Creating the lists

After setting, which data shall be created, you have to consider, which information are necessary for that
purpose.
All staff members are provided with name and card-number in the permanent staff list. The possible
short business trips (with identification and designation) must also be provided via a list.
Figure 86: Creation of the list descriptions
Version: 04.01.07.00
Mark an input in the tree and set the charac-
teristics on the right side.
as string with ASCII-characters (length 2). Be-
cause you know, that a Unique transponder is used,
the ID is defined as string with numeric charac-
ters (length 13). The Name is set as string with
ASCII-characters (length 20). Date_Time is set as
date_time. The Reason is defined as string with
ASCII-characters (length 20). When you have fin-
ished these settings, the tree should look as shown
in the adjoining figure.
These two lists are defined in the Studio appropri-
ately. For this mark the entry Lists in the tree of
the edit dialogue. Via Paste a new list is created.
This Liste1 is named Permanent staff. Add 3 fields
and define them as follows: PID as string with
numeric characters (length 13) (according to data
record description), Name as string with ASCII-
characters (length 20) and Status as string with
numeric characters (length 1).
Page 93
Identification is set
www.datafox.de