Using Sticky Media - Roland TrueVIS VF2-640 User Manual

Using Sticky Media

This setting is used to peel off the media before starting printing when using media that sticks easily to the platen.
This setting is effective to prevent media jams.
Note, however, that peeling off the media may cause unstable media feed. Leave this menu item set to "DISABLE"
unless you specifically need to change it.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
3.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
MEDIA RELEASE
4.
Press [▶] to display the screen shown below.
MEDIA RELEASE
DISABLE DISABLE
5.
Press [▲] or [▼] to select "ENABLE".
6.
Press [ENTER] to confirm your entry.
7.
Press [MENU] to go back to the original screen.
MEMO
• Default setting: "DISABLE"
Configuring Settings to Match the Properties of the Media
1. Optimizing the Output Quality
81