9.
Install a new knife.
Slide the knife to align it with the groove (
10.
Slowly insert the knife into the groove.
11.
Tighten the screw.
Take care to ensure that the knife does not slip out of position at this time.
12.
Close the front cover.
13.
Press [ENTER].
When the following screen is displayed again, the blade replacement is finished.
MAINTENANCE
REPLACE KNIFE
14.
Press [MENU] to go back to the original screen.
). The knife is secured in place by the magnet(
Replacing the Separating Knife
).
4. Replacing Consumable Parts
167