Training Area; Maintenance Checklist; Care And Maintenance; Product Specifications - Matrix MABR1 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
PRODUCT INFORMATION
PROPER USAGE
1. Do not exceed weight limits of the exercise device.
2. If applicable, set safety stops to appropriate height.
3. If applicable, adjust seat pads, leg pads, foot pads, range of motion
adjustment, or any other type of adjustment mechanisms to a comfortable
start position. Make certain that the adjusting mechanism is fully
engaged to prevent unintentional movement and to avoid injury.
4. Sit on bench (if applicable) and get into appropriate position for exercise.
5. Exercise using no more weight than you can safely lift and control.
6. In a controlled manner, perform exercise.
7. Return weight to its fully-supported start position.

MAINTENANCE CHECKLIST

ACTION
Inspect Hardware
2
Inspect Frame
3
Clean Machine
Clean Grips
1
Upholstery & Grips should be cleaned with a mild soap
1
and water or a non-ammonia based cleaner.
Inspect bolts and other fasteners to ensure they are fully
2
tightened and unit operates as intended.
Inspect frame for damaged, worn or broken parts.
3

CARE AND MAINTENANCE

Replace defective components immediately and/or keep the equipment out of
use until repair. Pay special attention to components most susceptible to wear.
FREQUENCY
Monthly
Bi-Annually
As Needed
As Needed
ENGLISH

TRAINING AREA

FREE AREA
0.6
(2
)
M
FT
WIDE PATH

PRODUCT SPECIFICATIONS

Product Weight
Max Training Weight
Max User Weight
Overall Dimensions
(L x W x H)
4
1.42 M
(56")
0.78 M
(30.5")
36 kg / 79.5 lbs
159 kg / 350 lbs
136 kg / 300 lbs
142.4 x 77.5 x 43.7 cm /
56 x 30.5 x 17.25"

Advertisement

Table of Contents
loading

Table of Contents