Programmable Options; Developing Applications Using The Sdk - Infinite Peripherals Infinea X DF User Manual

Infinea X DF User Manual

Programmable Options

These optional settings are configured in the SDK.
Programmable Description
options
Set Charging Enables or disables battery backup sharing
capability to charge the iOS device from the IX
removable battery.
Scan Mode
• Single Scan
Scanning a single barcode by pressing the
Scan button.
• Multi Scan
Scanning multiple barcodes by pressing
and holding the Scan button.
• Motion-Detect
Scanner is activated automatically when
barcode is placed near the barcode
engine.
• Multi-Scan without Duplicates
Scanning multiple barcodes without
duplicates.
Pass Through When the pass through sync setting is enabled
Sync and the charging cup is plugged into the wall
outlet, the iOS device may be synced with a PC
or MAC. Default setting is off.
Note: If Pass Through Sync is enabled, the iOS
device does not charge when plugged into an
external charger.
Time Out Set timeout for a minimum of 60 seconds or up
to 64,800 seconds (18 hours).
Developing Applications Using
the SDK
Software is not automatically provided with your unit.
Integrating the device into your application requires the use of
the Infinite Peripherals Universal SDK. The SDK incorporates an
API specifically for developing applications to use with your unit's
functionality.
For additional details on using the Infinite Peripheral Universal SDK,
please refer to the appropriate SDK documentation. You can contact
your Infinite Peripherals account representative for third-party software
solutions.
For the latest Infinite Peripheral Universal SDK please visit our
developer portal:
https://developer.ipcmobile.com
8