Getting Started; Accessories - Infinite Peripherals Infinea X DF User Manual

Infinea X DF User Manual
Infinea X DF Features
Infinea X DF allows you to scan barcodes into an iOS device. Before
using the Infinea X DF, charge the battery fully.
These are the key features of the Infinea X DF.
Feature Description
Barcode Supports one-dimensional (1D) and two
scanner dimensional (2D) barcode symbols, which can
be read in any direction (omni-directional). The
effective reading distance of the barcode reader
varies depending on the barcode size. The
barcode scanner is capable of reading barcodes
on a LCD screen.
RFID/HID RFID tag/card reader reads/writes at 13.56MHz.
Battery User replaceable Li-ion battery.
Indicators Three programmable indication features:
Audible — internal electro-magnetic buzzer
Visual — four multi-color SDK LEDs (blue, green, red, and
orange).
Haptic — programmable vibration motor.
Power On-board fuel gauge, which facilitates accurate
monitoring monitoring of significant battery attributes using
the SDK.
Bluetooth Available Bluetooth 2.0 SPP compatibility, which
allows connection to a Bluetooth peripheral, such
as a printer.
Case Case for the unit is rated IP54 for protection
against dust and fluid access.

Getting Started

To get you up and running with your new unit, review these sections.
Observe any notes, cautions, or warnings throughout this guide for
additional information, special care required, or important points to
prevent injury or adverse affects.
What to do Section
Install battery Install Infinea X
DF battery pack
Charge Infinea Charge the
X DF Infinea X DF
Install Develop
software applications
Power on the Turn on the
Infinea X DF Infinea X DF

Accessories

Visit our website at https://ipcmobile.com or contact your Infinite
Peripherals account representative for additional information about our
current and future product accessories.
Why is this important?
Your unit is shipped with
approximately 30% of the full
charge capacity.
Before initial use charge the
battery completely.
Before using the barcode
scanner, RFID/HID reader, and
LED indicator features you must
install software onto your iOS
device.
Initializes the barcode scanner
and/or RFID/HID functionality.
4