Kaba PowerLever 1550 Installation Manual page 8

Item Description
1 Screw packet for latchbolt assembly and strikes containing:
1A • 2 - #8 x 3/4" Phillips head combination screws
1B • 2 - #8 x 3/4" Phillips head combination screws
1C • 2 - #12 x 3/4" Phillips head combination screws
2 Trim mounting packet for 1 3/8" - 2" door, containing:
2A • Cylinder insert for door thickness greater than 1 1/2" (wide stop)
2B • Cylinder insert for door thickness less than or equal to 1 1/2" (narrow stop)
2C • Lever release tool
2D • 1/4-28 x 2 1/2" Phillips round head screws (4)
Model 1550 or 45xx:
2E • 8-32 x 1" Torx security screws (4)
2F • 8-32 x 1 1/2" Torx security screws (2)
Model PROX 9000:
2E • 8-32 x 1" Phillips round head screws (4)
• 8-32 x 1 1/2" Phillips round head screws (2)
• 8-32 x 1" Torx security screws (2)
2G • 7/16" diameter x 5/8" long spacers for 1 3/8" door thickness (2)
2H • 7/16" diameter x 1/4" long spacers for 1 3/4" door thickness (2)
2I • 1/4" lock washers (4)
2J • Tailpiece for IC key core for door thickness less than or equal to 1 1/2"
2K • Tailpiece for IC key core for door thickness greater than 1 1/2"
3 Outside Levers
3A • Lever to accept conventional key cylinder
OR
3B • Lever to accept interchangeable key core
4 Inside Levers
• Lever
5 Key Cylinders
5A • Conventional 6-pin
OR
5B • Interchangeable 6-pin core (not furnished with lock assembly)
5C • Interchangeable 7-pin core (not furnished with lock assembly)
6
6A Model 1550 Outside lock case assembly
6B Model 45xx Outside lock case assembly
6C Model PROX 9000 Outside lock case assembly
4 Parts Check Document Number 481.093 Rev. A - 06/04