Removing The Storage Module; Configuring The Storage Module For 5.25" Devices - Advantech HPC-7480 User Manual

2.6.2

Removing the Storage Module

1. Locate the release tab on top of the storage module as shown below. Press the
release tab to unlock the storage module.
2. Once unlocked, push the module forward and out of the chassis.
2.6.3

Configuring the Storage Module for 5.25" Devices

1. Remove the 5.25" drive trays from the storage module.
2. Remove the screws and drive tray brackets from the drive trays.
3. Install the 5.25" devices into the storage module.
4. Replace the module back into the chassis.
5. Ensure that the storage module is securely locked into position.
Figure 2.6 Installing 5.25" Devices into the Storage Module
1
2
Figure 2.5 Removing the Storage Module
9 HPC-7480 User Manual