Warnings And Safety Rules - R.G.V. LUXOR 20 Use Instruction

WARNINGS AND SAFETY RULES
The maker declines all responsibility in the case of improper use of the machine.
Do not use the food slicer for frozen food, boned meat or anything other than foodstuffs.
Periodically check the state of the cable; should it be damaged, it must be replaced by qualified staff.
• Do not submerge the food slicer in water when cleaning.
• The slicer has not to be washed by jet of water.
• Do not use extension cables.
• Do not unplug by pulling the cable.
• Do not use the machine with wet hands or bare feet.
• Put the slicer distant from sources of heat.
Even though the machine is equipped with safety devices, keep your hands away from the blade and moving parts.
During maintenance or cleaning operations (therefore, having removed the protections), the remaining risks should be carefully
considered. Before carrying out any maintenance operation, unplug the machine and make sure that the graduated knob is in "0"
position.
Remove the knife guard periodically, unscrewing the screw (in the centre of the knife guard), then clean both the blade and the inside
of the knife guard with alcohol or warm water.
Warning This device is not foreseen to be used by people (children included) with reduced physical, sensory or mental capacities
or by people without experience or knowledge, except they have had the possibility of benefiting, by an intermediary responsible
of their safety, of a surveillance or of preliminary instructions relative to the use of the device. It is better to watch over children to be
sure they do not play with the device.
This operation must be carried out with the utmost care as it concerns a cutting device.
The blade has to be replaced when it is no more possible to sharpen it or when the distance between the cutting part of the blade and
the blade protector is more than 3 / 4 mm.
The machine and all its parts should be cleaned with soft cloths moistened with standard neutral detergents.
Use soft cloths for drying.
When the sliding carriage moves with difficulty, lift the food slicer and place it on its side. Carefully clean the cylindrical sliding bar and
lubricate it with industrial oil.
6