User Functions - Xtralis ICAM ILS-1 Product Manual

Xtralis ICAM ILS-1 Product Guide Xtralis ICAM

6.2 User Functions

Figure 6-1: Programming buttons on the unit
Press and hold SELECT and CHANGE keys simultaneously until the sounder beeps to initialize function
selection.
Press and release SELECT key to sequentially step through functions.
Press and release CHANGE key to modify setting.
The relevant LED flashes continuously to indicate the function selected.
To enable updates to the system, enter the three digit access code (510). To enter numbers into the
system, each number must be sequentially selected in turn. For example to select 5, press the
CHANGE key six times to illuminate the number 5 LED on the display then press the SELECT button.
During this operation, the CODE LED flashes, then the UNLOCK LED illuminates on successful entry.
10 www.xtralis.com