Advertisement
STEP 3: Determine placement for Shelves (I) then insert Shelf Supports (A) into corresponding
pre-drilled holes inside Bookcase (J). Tilt in and gently lay Shelf upon Supports.
STEP 4: Bookcase (J) is equipped with Levelers under each corner which are accessible from the
bottom INSIDE of Bookcase. If necessary, insert Leveler Tool (E) into opening in corner(s) and turn
clockwise/counterclockwise to adjust. NOTE: Take care during leveling process to prevent Bookcase
from tipping over. A second person holding Bookcase is advised.
Leveler accessible from inside
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(J)
(E)
(J)
Bookcase.
(A)
(I)
(J)
Page 4 of 6
Advertisement
