Ballard Designs Bunny Williams Milton MV460 Manual

Bookcase

PRODUCT NAME: BW Milton Bookcase

ITEM NUMBER: MV460

ASSEMBLED DIMENSIONS : 90"H x 46"W x 17"D

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

UPDATED: 1-6-2021

Prevent accidentally discarding small parts or

hardware. Retain all carton contents until assembly

and installation are complete.

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

MADE IN INDIA

Page 1 of 4

Table of Contents

Need help?

Do you have a question about the Bunny Williams Milton MV460 and is the answer not in the manual?

Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: BW Milton Bookcase ITEM NUMBER: MV460 ASSEMBLED DIMENSIONS : 90”H x 46”W x 17”D Prevent accidentally discarding small parts or hardware. Retain all carton contents until assembly and installation are complete. PRODUCTS ARE NOT INTENDED MADE IN INDIA FOR COMMERCIAL USE.
Page 2 Assemble in location for intended use. REQUIRED TOOLS: Ltr. Qty. Hardware Included Phillips Screwdriver Anchoring/Anti-Tip L - Brackets -Two person assembly suggested. (Page 3) Remove all parts, hardware and Anchoring/Anti-Tip protective packaging from carton Screws and carefully arrange on a clean, (Page 3) level, padded surface.
Page 3 STEP 1: Determine installation location, then identify two *wall studs behind Bookcase (C). Push Book- case into place then slide each L-Bracket (A) over top of unit and center in front of each *wall stud. Use pencil to mark wall at top of each Bracket. IMPORTANT: Orient Brackets as illustrated to ensure they are not visible after installation.