Technical Data - Graco DutyMax 24M054 Operation

Technical Data

Technical Data
EH200DI
Maximum Pressure psi (bar)
Hydraulic Reservoir Capacity Gallons (Liters)
Motor HP (kW)
Voltage, Amperage Frequency Phase
Maximum Tip size (paint)
Maximum Delivery (paint) gpm (lpm)
Fluid Inlet in. [npsm (m)]
Fluid Outlet in. [npsm (m)]
Hose Connection [npt (f)]
Cycles per gallon (l) (paint)
Dimensions and Weight
Length (handle bar retracted) in. (cm)
Width in. (cm)
Height (handle bar retracted) in. (cm)
Weight lb (kg)
Sound Levels
(Measured at maximum normal load conditions)
Engine HP
Sound Pressure dB(A)
Sound Power dB(A)
Maximum back fuse rating for EH300DI:
Fuse type aM: 63 A
Fuse type gL: 80 A
NOTE: Under voltage release coil in motor starter for EH300DI will not energize if voltage is less than 85% of listed
voltage in Technical Data table.
Under voltage release coil in motor starter for EH300DI will de-energize and sprayer will stop if voltage drops
to 85% of rated nominal voltage. Voltage will need to be increased and sprayer will need to be restarted.
NOTE: To operate the EH300DI (24M056) sprayer with a generator, the generator must be sized for 15 kW output (minimum).
Basic Sprayer Wetted Parts:
Zinc and nickel-plated carbon steel, stainless steel, PTFE, acetal, chrome plating,
leather, V-Max UHMWPE, aluminum, tungsten carbide, ceramic, nylon
22
U.S. Metric
3300 228
1.25 4.75
3.0 2.2
220 VAC, 15.0 220 VAC, 15.0
A, 50 Hz, A, 50 Hz,
1 Phase 1 Phase
0.039 0.039
1.56 5.9
1 1
3/8 3/8
3/8 3/8
80 21.1
47.7 121
26.5 67
33.4 85
197 89
3.0 3.0
80 80
95 95
3A2246A