Nat Aging-Time; Nat Auto-Reset-Session - H3C S9500 Series Command Manual

Routing switches

Hide thumbs Also See for S9500 Series:

Table of Contents

Command Manual – NAT

H3C S9500 Series Routing Switches

1.1.12 nat aging-time

Syntax

nat aging-time alg time-value

undo nat aging-time alg

View

System view

Parameters

alg time-value: Aging time of NAT entries requiring application level gateway (ALG)

processing in seconds.

Note:

As for the NO-PAT method, the aging time cannot be set and it adopts fast aging time.

Description

Use the nat aging-time command to set the aging time for NAT entries.

Use the undo nat aging-time command to restore the default value of the aging time

for NAT.

By default, the aging time of NAT entries for application level gateway (ALG) is 120

seconds, that for FTP is 7200 seconds.

Examples

# Set the aging time of NAT entries requiring ALG processing to 245 seconds.

<H3C> system-view

[H3C] nat aging-time alg 245

Syntax

nat auto-reset-session

undo nat auto-reset-session

View

System view

Chapter 1 NAT Configuration Commands

1-11

Table of Contents