A.MENARINI ARKIVE SL Operator's Manual page 46

The ArkiveApp software update is carried out automatically whenever new software is
released to all the registered users.
The FINDER works completely automatically. The only manual operations are those for
inserting the cartridges and racks for the archiving and retrieval missions.
The on/off buttons are located on the touchscreen display on board the device.
The procedure for restoring operation after a fault or jamming entails:
1. the opening of the front or rear safety guards;
2. the pressing of the emergency button;
3. a check of the cause of the fault or jamming;
4. removal of the block by activating the manual flywheels;
5. the restarting from the panel that automatically restores the conditions existing
immediately prior to the fault or jamming.
"ARKIVE SL FINDER" OPERATOR'S MANUAL
THIS MANUAL IS THE PROPERTY OF THE MANUFACTURER AND ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED
Approved
11/2019 - Rev. 1.3
- 46 58 -
of
.