Advertisement
The methods of storing the materials must foresee containers and devices suitable for
preventing damage due to vibrations, bumping, abrasions, corrosion, out-of-range
temperatures or other environmental conditions that could harm the device.
The stored parts must be checked from time to time to detect any deterioration.
The device is protected on the external surfaces with a film that must be removed
manually after completing the positioning phase.
Before installation, remove all protective parts. Carefully clean the device, manually
removing all the material used to protect the components.
Take great care with steel surfaces in order to prevent damaging them; in particular,
avoid the use of corrosive products and do not use abrasive materials or sharp tools.
Do not use pressurised or direct water jets.
Do not use aggressive materials such as cleaning solvents.
Carefully read the instructions on the label of the cleaning products before using them.
"ARKIVE SL FINDER" OPERATOR'S MANUAL
THIS MANUAL IS THE PROPERTY OF THE MANUFACTURER AND ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED
Approved
11/2019 - Rev. 1.3
- 17
58 -
of
.
Advertisement
