ekwb EK-Quantum Reflection Uni 140 D5 PWM D-RGB User Manual page 8

INLET A
FILL
OUTLET A
FILL
INLET B
OUTLET B
INLET B/DRAIN
Using EK-Quantum Reflection UNI 140 D5 PWM D-RGB as a
distribution plate:
If components will only be connected to 2 of the ports, please
observe pump/res combo configurations!
There are 2 sets of Inlet and Outlet ports (A and B) that are linked
in series, each pair may be used to connect one or multiple
components in series or parallel as required. Components in Set A
must return to Inlet A where the coolant passes directly to Outlet B.
The components in Set B may return to any Inlet B position.
FILL
OUTLET B
INLET B
FILL
INLET A
OUTLET A
INLET B / DRAIN
- 8 -