Dynamic Xxl Components - fischertechnik PROFI Dynamic XXL Booklet

Dynamic XXL components

The flex-rails
stacle course you can be as creative as you like and build special,
crazy curves, loops and jumps. The flex-rails are available in
and 180 mm lengths.
The high speed flex-rails
180 mm and with higher side edge allow the balls
to reach maximum speed in curves.
A lever is attached in the middle of the
over to guide the balls alternately to the flex-rail
attached on the right or left.
The cross-over locking lever
the sub-frame of the cross-over. It is driven by a
rack and pinion with locking mechanism, enabling
manual adjustment of the cross-over.
Once caught in the
to the center and fall through the hole on to the
next rail.
are flexible in all directions. When building an ob-
with a length of
cross-
is installed in
rotary funnel, the balls whirl
Tip: If the flex-rails are bent after disassembly,
they can be straightened by clamping them on one
90 mm of the base plates for a short time. This straightens
the bend.
The flex tube
rotate in their holders, allowing you to be creative
in the design of your courses.
The 90° curve
quickly and build tight curves simply.
The 180° curve
direction of the ball in a tiny space.
magnetic ball holder
The
chain and transports the steel balls back up.
3
is 360 mm long. The two ends can
allows you to change direction
lets young architects change the
is attached to the