Further Tips - fischertechnik PROFI Dynamic XXL Booklet

Further tips:

• All Dynamic XXL obstacle course models work best when used on a stable, even and level surface.
• If assembled models no longer work properly after transport it is usually necessary to readjust only individual compo-
nents or sections. Also see the tips for the individual obstacle course.
• If the flex-rails are bent too much after disassembling the model, they can be straightened by clamping them on
the base plate for a short time. This reduces the bending.
• Naturally you can design your own obstacle course with the Dynamic XXL Construction Set. Certainly you can work
out other ingenious designs and other fascinating obstacles and effects.
• Other construction sets from the PROFI Dynamic line are available online at
www.fischertechnik.de/en/products/playing/profi-dynamic-marble-runs
• For even more action, you can download free assembly instructions for this construction set with Dynamic XM from
the fischertechnik homepage:
www.fischertechnik.de/en/service/downloads/dynamic
13