TESTit
Measuring
The clamping pressure
The clamping pressure actually set on the machine tool
must be transferred to the software.
The clamping device must be entered correctly [axial/radial
ratio].
This is the only way to correctly determine the TARGET
measuring force range [green range] in the tachometer.
This is calculated with due consideration of the set clamp-
ing pressure and the selected tolerance.
If a clamping device with manual actuation is selected, the
»Clamping pressure« field changes to »Torque«.
If the Bluetooth® symbol is visible and gray, then TESTit
V2 with connection capability is within range or TESTit V1
has already been taught-in.
If the Bluetooth® symbol is then clicked, a selection window
opens.
Order hotline +49 7144.907-333
57