Hainbuch TESTit Operation Manual page 42

TESTit
Installing and setting up the software
42
* Mandatory field
The following checks are run through:
Are all mandatory fields filled in?

What is the maximum radial measuring force?

If the maximum radial measuring force is less than the
maximum axial draw force/compression force, then a
new window appears with the message
»Maximum radial measuring force must be greater than
the maximum axial draw force/compression force»
To create a new clamping device
1. Click »New«.
2. Enter the name of the new clamping device.
INFORMATION
The input field is limited to 30 characters.
3. Click »OK«.
Alternatively you can use the following functions for an ex-
isting clamping device
Order hotline +49 7144.907-333