Water Supply - Smeg WD1050 Operating Instructions Manual

5.4. WATER SUPPLY

The machine is supplied with two water supply pipes that join to a non-return device
inside the machine.
The pipes are designed for connection to cocks with 3/4" gas threaded bushings.
The following pipes (see the picture below) must be connected to water mains:
cold water pipe;
pressurized demineralized water pipe (min. 2 bar - max. 5 bar) – if present.
If demineralized water isn't available: don't connect the demi pipe
to the cold or hot water, leave it disconnected and see the
instructions (paragraph "DEMI WATER SETTINGS" 6.11) in order to
set correctly the demi water parameter.
WD1050
fig. 3 – Back view of the machine
12/04/2010 Pag. 11