Electrical Connection - Smeg WD1050 Operating Instructions Manual

5.7. ELECTRICAL CONNECTION

The machine is designed for connection to an electricity main with the following
voltage rating:
• WD1050
There is also a single-phase and 230V three-phase "without neutral", with the following
electrical characteristics:
• WD1050-1
• WD1050-3
WARNING
The machine is equipped with a power cable for permanent connection to the
electrical power supply.
A switch (or circuit breaker) shall be prepared as the means for
disconnection:
WARNING
It is essential for the electricity mains to which the machine is connected to
comply with the current standards in force (CEI 64-8/7;V2 standards).
Always make sure that the ground connection is efficient.
Our company declines all liability for damage caused by connection to a
defective socket that fails to ensure a perfect connection to the general earth
conductor, or by a poorly efficient grounding circuit.
WD1050
~ 230V 3 / N / PE
~ 230V 1 / N / PE
~ 230V 3 / PE
1.
Il must be easily accessible for the user.
2.
It shall be in close proximity to the equipment.
3.
It shall be marked as the disconnecting device for the equipment.
50Hz.
50Hz.
50Hz.
12/04/2010 Pag. 14