Smeg WD1050 Operating Instructions Manual page 8

• Never ever touch the heating element immediately after a washing cycle has
terminated.
• The heating element could become slightly darkened during use of the instrument
washer, even to a localized extent. This should be considered normal as it depends
on the operating mode and does not impair the way the appliance works.
• At the end of its working life, the appliance must be rendered unusable. Cut off the
power flex after having removed the plug from the power socket. The appliance
must then be consigned to an authorized disposal center.
• If the appliance operates in a faulty way, unplug it from the electricity main, shut off
the water cock and contact your nearest authorized Assistance Center.
Only open the door after the washing cycle has terminated.
If you open the door while a programme is in progress, hot water, steam
and other liquids will spill out and may injure the user. Only authorized
and well-informed personnel are allowed to use the machine.
WD1050 12/04/2010 Pag. 5