Maintaining Your Casa Reformer - Peak Pilates CASA REFORMER Assembly Manual And Owner's Manual

MAINTAINING THE CASA REFORMER
You have purchased a high-quality piece of equipment that is constructed of the finest components and materials.
Proper care requires only a small, but very important investment of time in a regular, routine maintenance program.
Part
Inspect:
Overall Machine
Springs
Tracking System
Hardware
Footbar Support
Bar Hardware
Clean:
Frame
Upholstery
Tracking System
Replace:
Springs
Ropes
Double Loops
Safety Clips
INSPECT
l overall machine
Overall Machine: We highly recommend that you visually inspect the machine daily.
Springs: Even with extensive pre-testing and rigorous quality inspections, the possibility of spring failure exists. In
addition, severe nicks or abrasions may develop as a result of misuse and could lead to springs breaking prematurely.
Not replacing springs in a timely manner could also lead to failure. While breaking or deformation of a spring and the
resulting potential for injury is a remote possibility, a daily inspection is critical. If, at any time. a gap between the coil of
a spring becomes evident, that spring needs to be replaced immediately. The springs are plated to prevent rust or
corrosion from perspiration, condensation and/or humidity. Minor variations in the brightness of the finish are the
result of different plating batches and do not affect the performance of the springs.
Tracking System: The protected bearings in the carriage wheels are permanently lubricated and require no further service.
You should inspect the axles and hardware weekly. Remove any debris that might be trapped between the wheel and
the carriage frame and tighten the axles if any wheel "play" is evident.
Hardware: All hardware should be checked at least every 2 months to insure that every nut, bolt and fastener is
secure. If at any time a component exhibits free play, the hardware needs to be properly re-tightened immediately.
Foot Bar and Foot Bar Support Bar: The hardware that connects the foot bar support bar to the foot bar should be
inspected daily or after each use. The bolts should be sufficiently tight to create friction at the pivot point and prevent
the foot bar support bar from swinging freely.
PEAK-CASA-OM-2020.indd 15 PEAK-CASA-OM-2020.indd 15
Daily Weekly
l springs l tracking system
Bi-Monthly Annually
l hardware l foot bar and foot bar support bar
As Needed
www.peakpilates.com 15
4/16/20 8:23 PM 4/16/20 8:23 PM