Touch Pad Description - Dexter Laundry T-30 Original Instructions Manual

INDICATOR LIGHTS (L.E.D.s)
Cycle (1 through 5)
Heat Relay
Programming
Stop
SWITCHES (Pushbuttons)
Up/Increase
Down/Decrease
Program
Select/Enter
Cycle
Stop
8514-219-001 REV E PAGE 15

TOUCH PAD DESCRIPTION

These L.E.D.s are on solid when a particular cycle is chosen for
operation or programming.
This L.E.D. is part of the 4-digit numeric display and will be on solid
during the drying part of a cycle when the heat relay does not need
to be on. The L.E.D. will be blinking when the heat relay needs to
be on. The L.E.D. will not be on solid or blinking (off) if the cycle is
stopped, complete, in cool down, or terminated.
These L.E.D.s are on solid as they are selected during the
programming of the dryer controller.
This L.E.D. is on solid when either the STOP button is pressed once
or the door is opened during an operating cycle.
This touch pad switch will increment (increase) dry time, cool down
time, and drying temperature. It will also scroll upwards when
selecting a dry cycle.
This touch pad switch will decrement (decrease) dry time, cool
down time and drying temperature. It will also scroll downwards
when selecting a dry cycle.
This touch pad switch allows the dryer controller to enter the
permanent programming mode.
This touch pad switch will select one of the three variable parts of
the dry cycle (dry time, temperature, or cool down) by sequencing
through them. Once one of the variable parts of the dry cycle is
chosen and changed, this touch pad switch will enter the new
(changed) value into the dry cycle program.
This touch pad switch allows the dryer controller to enter the
temporary programming mode.
This touch pad switch will stop the dryer during a dry cycle without
clearing the present drying cycle if pressed once. If pressed and
released twice, consecutively, the present dry cycle will be cleared.
Description
Description