Touch Pad Description - Dexter Laundry B-Series Operator's Manual

INDICATOR LIGHTS (L.E.D.s)
Cycle (1 through 5)
Gas Valve
Programming
Stop
SWITCHES (Pushbuttons)
UP/INCREASE
DOWN/DECREASE
PROGRAM
SELECT/ENTER
CYCLE
STOP
START
8514-279-001 REV B PAGE 14

TOUCH PAD DESCRIPTION

These L.E.D.s are on solid when a particular cycle is chosen for operation or
programming.
This L.E.D. is part of the 4-digit numeric display and will be on solid during the drying
part of a cycle when the gas valve does not need to be on. The L.E.D. will be blinking
when the gas valve needs to be on. The L.E.D. will not be on solid or blinking (off) if
the cycle is stopped, complete, in cool down, or terminated.
These L.E.D.s are on solid as they are selected during the programming of the dryer
controller. The reversing L.E.D. will also remain lit during the operation of a reversing
dry cycle.
This L.E.D. is on solid when either the STOP button is pressed once or the door is
opened during an operating cycle.
This touch pad switch will increment (increase) dry time, cool down time, and drying
temperature. It will also scroll upwards when selecting a dry cycle or toggle between
reversing and non-reversing mode during programming.
This touch pad switch will decrement (decrease) dry time, cool down time, and drying
temperature. It will also scroll downwards when selecting a dry cycle or toggle between
reversing and non-reversing mode during programming.
This touch pad switch allows the dryer controller to enter the permanent
programming mode.
This touch pad switch will select one of the three variable parts of the dry cycle (dry
time, temperature, or cool down) by sequencing through them. Once one of the
variable parts of the dry cycle is chosen and changed, this touch pad switch will enter
the new (changed) value into the dry cycle program.
This touch pad switch allows the dryer controller to enter the temporary
programming mode.
This touch pad switch will stop the dryer during a dry cycle without clearing the
present drying cycle if pressed once. If pressed and released twice, consecutively,
the present dry cycle will be cleared.
This touch pad switch will start the operation of a dry cycle if pressed and released
once. Pressing and holding this touch pad switch will display the current
temperature of the dryer heat sensor as long as it is held in the depressed position.
Description
Description