HUBER+SUHNER MASTERLINE Ultimate Hybrid High Voltage 4/12 Installation Manual

INSTALLATION
MANUAL
MASTERLINE Ultimate Hybrid High Voltage 4/12 (MLUH HV 4/12) blunt
cut at BTS side
TABLE OF CONTENT
• SAFETY NOTES .......................................................................................................................................................................................... 1
• HANDLING OF THE CABLING SYSTEM .................................................................................................................................................... 1
• HANDLING OF FIBER OPTIC ASSEMBLIES ............................................................................................................................................. 1
• RRH END OF ASSEMBLY .......................................................................................................................................................................... 2
• BASE STATION END OF ASSEMBLY ........................................................................................................................................................ 9
• FIBRE OPTIC ALLOCATION ..................................................................................................................................................................... 11
• POWER CODING ...................................................................................................................................................................................... 11
• DISMANTLING ........................................................................................................................................................................................... 12
• REVISION HISTORY ................................................................................................................................................................................. 12

SAFETY NOTES

HANDLING OF THE CABLING SYSTEM

HANDLING OF FIBER OPTIC ASSEMBLIES

HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and
accessories other than the ones recommended in the latest revision of this installation manual. Any installation performed by unqualified personnel
voids the product warranty provided by HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these
Installation and maintenance work on this device may only be carried out by an authorized
electrician. National laws and regulations must be observed during installation.
The housing and the components used must be checked for exterior damage prior to
installation. If the cabling system is defective, it may not be used. Please contact
HUBER+SUHNER, if there are any doubts about the condition of the cabling system.
To avoid any damage due to improper installation, please keep in mind below points:

AVOID any additional stress on connector head by twisting or bending when routing or
locating it

AVOID installation path around any sharp objects

AVOID uncontrolled knocking of connector head on any hard object

AVOID any contact of connector head with any additional substance such as glue/oil/fat
etc. unless prior authorization is given by HUBER+SUHNER AG
See also "User handling manual for cables and cable systems" on
www.hubersuhner.com/en/support
In order to guarantee the performance, fiber optic assemblies need to be treaded carefully
and with attention on the minimum bend radius and never exposed to dirt.
See also "User handling manual for cables and cable systems" on
www.hubersuhner.com/en/support
products. For advice concerning the general handling of these products please contact HUBER+SUHNER.
HUBER+SUHNER AG
Fiber Optics
MASTERLINE Ultimate Hybrid High Voltage
4/12 (MLU HV 4/12) blunt cut at BTS side
DOC-0000803885 Rev B
November 30, 2018
Page 1 of 12