Table of Contents
Advertisement
Dust Drawer Cleaning
1. Disconnect power to the machine.
2. Turn the latch knob 90° clockwise and pull on the
handle to remove the dust drawer for cleaning.
3. When the draw is clean, install the drawer into the
cabinet and secure in place by turning the latch
knob 90° counter-clockwise.
Filter Identification & Installation
The Pleated Fire Resistant Cartridge Filter is located
inside of the cabinet and can be cleaned by push-
button pulse-jet cleaning of the cartridge filter from an
onboard air tank.
This table uses 2 cartridge filters which measure
Ø11.2" x 13" (Ø285 x 330mm) each, for a total filtering
2
area of 107.6 ft
(10m
2
).
27
27
Advertisement
Table of Contents
