Transporting And Lifting; Installation - Baileigh Industrial DDTM-4840-HD Operator's Manual

TRANSPORTING AND LIFTING

IMPORTANT:
such as a truck operator, crane operator, etc. If a crane is used to lift the machine, attach the
lifting chain carefully, making sure the machine is well balanced.
Follow these guidelines when lifting with truck or
trolley:
• The lift truck must be able to lift at least 1.5 – 2 times
the machines gross weight.
• Make sure the machine is balanced. While
transporting, avoid rough or jerky motion, and
maintain a safe clearance zone around the transport
area.
• Use a fork lift with sufficient lifting capacity and forks that are long enough to reach the
complete width of the machine.
• Remove the securing bolts that attach the machine to the pallet.
• Approaching the machine from the side, lift the machine on the frame taking care that there
are no cables or pipes in the area of the forks.
• Move the machine to the required position and lower gently to the floor.
• Level the machine so that all the supporting feet are taking the weight of the machine and no
rocking is taking place.

INSTALLATION

IMPORTANT:
Consider the following when looking for a suitable location to place the machine:
• This unit is specifically designed for the filtration of smoke generated during ordinary welding
process work.
• Overall weight of the machine.
• Space needed for clear air flow and service access.
• Clearance from walls and other obstacles.
• Maintain an adequate working area around the machine for safety.
• Have the work area well illuminated with proper lighting.
Lifting and carrying operations should be carried out by skilled workers,
11
11