Hydraulic Oil Level Check - Wallenstein WXR720 Operator's Manual

Operating Instructions
Fig. 12 – Engine Oil Level check
1. Oil Level Dipstick
2. Oil Filler
3. Low Level
4. Full Level
Refer to the engine owner's manual included in the manual
tube for further information on engine oils.

6.6 Hydraulic Oil Level Check

Check hydraulic oil level every 40 hours or weekly.
Check with the machine parked on level ground and the engine
stopped.
The proper level is when the oil is visible at the full (upper)
mark on the dipstick.
1
2
IMPORTANT! Do not operate machine if oil level is not
00616 visible on the dipstick. Damage to the pump and other
components can occur.
Do not overfill the tank past the full mark.
IMPORTANT! Always check oil levels after changing filters
or servicing hydraulic components.
IMPORTANT! Hydraulic oil quality should be inspected
every 40 hours. If the oil is dirty or smells burnt, it should be
replaced.
IMPORTANT! Be aware of high oil temperatures.
Temperatures higher than 180 °F (82 °C) could cause seal
damage and degrade oil quality.
24
Fig. 13 – Hydraulic Tank Oil Level Dipstick
WXR720/L, WXR740/L
Trailer Wood Splitter
00617