Panel Leds; System Description - 3Com 5000 Series Installation Manual

3Com Router 5000 Family
Installation Guide
1) Power switch
3) Grounding screw
5) Fixed WAN interface (WAN0)
7) MIM SLOT2
Figure 2-13 Rear view of 3COM ROUTER 5232 Router

2.4.2 Panel LEDs

10 LEDs are provided on 3COM ROUTER 5232 Router. Their meaming is explained in
the following table:
Table 2-8 LEDs of 3COM ROUTER 5232 Router
LED
POWER
SYSTEM
READY
ACTIVE
1- 3
LAN

2.4.3 System Description

Table 2-9 System description of 3COM ROUTER 5232
Fixed interface
Slot
System power LED: OFF means power is off, ON means power is
on.
Hardware status LED: Blinking means the system runs normally.
ON/OFF means the system is abnormal.
Module status LED: ON means the module in corresponding slot
runs normally. OFF means the module runs abnormally or no
module is installed.
Blinking means data is being transceived by the module in the
corresponding slot. OFF means no data is being transceived.
Indicating the slot number.
Ethernet interface LED: Green means the interface is normal.
Blinking yellow means data is being transceived over the Ethernet.
Item
One AUX port
One console port
One LAN port
3
3Com Corporation
Chapter 2 System Specifications
2) Power socket
4) Fixed LAN interface (LAN0)
6) MIM SLOT1
7) MIM SLOT3
Indication
5232
2-11
5232
One AUX port
One console port
Two LAN ports