3Com 5000 Series Installation Manual page 76

3Com Router 5000 Family
Installation Guide
Figure 6-6 Position of the SDRAM on the 3Com 5000
To ensure you can install the SDRAM correctly, there are two clips In the SDRAM slot
matching two concave points in the SDRAM card.
II. Replacing the SDRAM
Step 1: Locate the position of the SDRAM card on the main board.
Step 2: Press the locking spring clips at both sides of the SDRAM slot outward with
appropriate strength to unseat the SDRAM.
Figure 6-7 Remove/install the SDRAM
Step 3: Hold the SDRAM by its edges with your thumb and index finger and pull it out
from the slot. Put the SDRAM into an anti-static bag to avoid ESD damage.
3Com Corporation
6-15
Chapter 6 Router Maintenance