Date & Time Set Procedure - Walgreens WGNBPA-220 Manual

DATE & TIME SET PROCEDURE
1. To adjust the date and time, press the "DATE & TIME SET"
button.
2. The display will show a blinking number showing the MONTH.
Change the MONTH by pressing the "MEM" button. Each press
will increase the number by one in a cycling manner. Press the
button to confirm the entry. The screen will then show a blinking
number representing the DAY.
3. Change the DAY, YEAR, HOUR, & MINUTE as described in Step 2
above, using the "MEM" button to change the numbers and
the button to confirm the entries.
Repeat process to set DAY, YEAR, HOUR, and MINUTE.
IMPORTANT: IF YOU ARE USING THIS BLOOD PRESSURE MONITOR FOR THE FIRST
TIME, PLEASE REMOVE THE PROTECTIVE FILM FROM THE DISPLAY SCREEN.
MEM
Press the button
Blinking Month
Increase Month
Confirm Entry
13