Date & Time Set Procedure - Walgreens WGNBPW-915 Manual

Note:
• Date and time will need to be reset if batteries are removed or
replaced.
• Replace all batteries at one time (as simultaneous set). Use only
1.5V "AAA" alkaline batteries.
• When the batteries are removed, the measurement values stored in
memory are retained. However, the date and time must be re-set.
• Remove batteries when unit is not in use for extended periods of time.
• Clean contacts on battery and in battery compartment with a soft
dry cloth each time you install batteries.
• Batteries are hazardous waste. Do not dispose of them together
with the household garbage.
13
DATE & TIME SET PROCEDURE
1. To adjust the date and time, press and hold the START/STOP
button for 3 seconds.
2. The display will show a blinking number showing the MONTH.
Change the MONTH by pressing the M button. Each press
will increase the number by one in a cycling manner. Press the
START/STOP button again to confirm the entry, and the screen
will show a blinking number representing the DAY.
3. Change the DAY, YEAR, HOUR, & MINUTE as described in Step
2. above, using the M button to change the numbers and the
START/STOP button to confirm the entries.
START
STOP
M
START
STOP
repeat process to set DAY, YEAR,
HOUR, & MINUTE
Press & hold
START/STOP button
blinking MONTH
increasing MONTH
confirm the entry
14