Date & Time Set Procedure - Walgreens Well WGNBPA-945 Manual

DATE & TIME SET PROCEDURE
1. To adjust the date and time, press and hold the START/
STOP button for 3 seconds.
2. The display will show a blinking number showing the
MONTH. Change the MONTH by pressing the M button.
Each press will increase the number by one in a cycling
manner. Press the START/STOP button again to confirm
the entry, and the screen will show a blinking number
representing the DAY.
3. Change the DAY, YEAR, HOUR, & MINUTE as described in
Step 2. above, using the M button to change the numbers
and the START/STOP button to confirm the entries.
repeat process to set DAY, YEAR, HOUR
START
M
STOP
START
STOP
M
START
STOP
and MINUTE
13
Press & hold the
START/STOP button
blinking MONTH
increasing MONTH
confirm the entry