Tandy 1200 HD User Manual page 5

CAUTION
This equipment generates and uses radio frequency energy. If not
installed and used properly, that is, in strict accordance with the
manufacturer's instructions, it may cause interference to radio and
television reception. The equipment has been type tested and found
to comply with the limits for a Class B computing device in accord-
ance with the specifications in Subpart J , Part 15, of Federal Com-
munications Commission (F.C.C.) rules, which are designed to provide
reasonable protection against such interference in a residential instal-
lation. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1 . Reorient the receiving antenna.
2.
Relocate the computer with respect to the receiver.
3 . Move the computer away from the receiver.
4.
Plug the computer into a different outlet so that computer
and receiver are on different branch circuits.
.
5 . Ensure card mounting screws, attachment connector
screws, and ground wires are tightly secured.
6.
Ensure card slot covers are in place when no card is
installed.
If necessary, the user should consult the dealer or an experienced
radio or television technician for additional suggestions.
Only peripherals certified to comply with the Class B limits may be
attached
to
this equipment. Shielded cables must be used to attach
these peripherals to this equipment. The manufacturer is not respon-
sible for any radio or TV interference caused by unauthorized mod-
ifications to this equipment. It is the responsibility of the user to
correct such interference.