Tandy 1200 HD User Manual page 159

APPENDIX C
Error Messages
(continued)
1701
LOAD ERROR (press Esc key to retry)
ExplanatiodAction: The DOS programs failed to load from
the fixed disk. Verify that the fixed disk drive is properly in-
stalled, its cables are securely connected, and the drive con-
troller circuit board is properly seated. Remember to turn off
and unplug the system unit before removing its cover.
The following error messages and tones indicate internal hardware or
software errors. If one of these errors occurs, turn off the system
unit power switch, wait fifteen seconds, turn the power switch on,
and try again. If the same error occurs again, contact your dealer.
I/O Parity Error
Expansion I/O Error
System Parity Error
Fatal RAM Error
AUDIO MESSAGES
One long beep followed by two short beeps
ExplanatiordAction: This message indicates a hardware error
related to the color/graphics video board. Operation will
continue. Check seating and connection of color/graphics
video board. Remember to turn off and unplug the system
unit before removing its cover.
c - 3