Tandy 1200 HD User Manual page 119

3.1 PROCEDURES FOR TURNING OFF THE
COMPUTER
There are a few guidelines you should observe when you turn your
computer off
0
Save
(store) your files on diskette or fixed disk before you
turn off the power to your computer. Everything in the
random access memory (RAM) will be lost, so do a file
save before you set the system unit power switch to off.
0
Do not turn off the computer if either of the disk drive
activity indicators is on.
0
Do not turn the computer off while a diskette is installed
in the diskette drive.
The procedure for turning off your computer is given below:
1. Return to the DOS prompt (A> or C>).
2.
Make sure both disk drive activity indicators are off.
3 .
If a diskette is installed, open the door of the diskette
drive and remove the diskette.
4.
Turn off the power switch at the rear of the system unit.
5 .
Turn off the video monitor.
6. Turn off any other system components.
3 - 1