Switch Settings And Jumper Configurations - Tandy 1200 HD User Manual

4.4 SWITCH SETTINGS AND
JUMPER CONFIGURATIONS
The information in this section deals with Switch Unit S1 and
Jumper JP1 (both located on the main circuit board of the system
unit). This information should take precedence over that provided by
the manufacturer of your option.
A ball pen works nicely for setting the switches on Switch Unit S1
The following diagram illustrates the two possible configurations for
Jumper JP1. Simply lift the jumper cap off of the jumper and install
it on the appropriate pins.
ONFIGURATION A CONFIGURATION
B
FRONT OF UNIT
FRONT OF UNIT
4 - 8